The AFMOD RS AIO The mod allows you to use 18350 or 18650 batteries. Simply insert the battery into your mod and you're good to go - the adjustment is made automatically based on your battery. Since this is a mechanical mod, we recommend batteries with discharge currents above 20A in 18650 and 10A or higher for 18350. We also recommend a resistance of at least 0.6 ohm and a coil diameter of 2.5mm when using an 18350 battery to avoid excessive heating of the tube.
The Flave Tank RS 22 hybrid atomizer is less demanding than its brother, the Flave Tank RS 24. This allows use in a mech mod with builds that require less power. You'll find precise and dense flavors on this RS 22 tank.
The Switch, Auto Adjust System!A lot of work has been done on the switch, which features no fewer than 8 parts and 4 keys. The design helps prevent electrical arcs on your batteries (thus extending their lifespan). The battery is indeed always in contact with the top of the switch, with the contact made on the inside. Here too, we've thought about maximizing the contact surface, which covers the entire circumference of the part. This prevents the switch from getting dirty and makes maintenance easy.
The switch can also be locked by simply rotating the locking ring less than a quarter turn. At the base of the switch, there's a stainless steel washer that can be unscrewed, allowing you to fully disassemble the switch for cleaning. By removing this washer, you can slide the lock ring to reveal the keys, marked with a small notch that lets you remove them with your fingernail easily, making it a breeze to take the switch apart.
We've designed a switch that's as pleasant to use as possible and as simple to maintain as possible, even though it won't require frequent special attention.
The 18350 format brings pleasant compactness for daily use, while offering decent battery life for this format thanks to its conductivity.
The 18650 format obviously gives you longer battery life, but also allows you to use lower resistances that require a higher continuous discharge current than an 18350 battery can provide.
Filling the RS 22 is done the same way as with the RS 24: by removing the top cap, you'll reveal a side filling hole that accepts most Chubby bottles on the market. Remember to hold the bottle a bit vertically and don't hesitate to insert it well into the designated hole.
Remember to perform a thorough cleaning of the AFMOD RS AIO before first use to avoid a taste of cutting oil residue, despite all the precautions taken during cleaning after machining.
Technical specifications:
- 18350/18650 battery not included.
- Height: 82.7mm (18350) and 112.1mm (18650) with drip tip.
- Lockable switch.
- Negative connector in silver-plated copper.
- Positive pin gold-plated.
UPGRADE SWITCH
Also discover:
